10% off all orders · ends 20 November 00days 00hrs 00min 00sec Code WELCOME10

BPC-157 TB-500 Bundle Purity: One Form Field, Two Materials

One purity box, two separate pens. How to record purity information for the BPC-157 and TB-500 in a STRENGTH bundle without stretching one figure across both.

Documentation illustration for the CLOVA guide: BPC-157 TB-500 Bundle Purity: One Form Field, Two Materials

Your procurement form has one box labelled "Purity", and your request is for the STRENGTH bundle, which contains two different materials. What goes in the box? Usually the honest answer is not a single number.

The STRENGTH bundle is two separate pens, supplied together for research use only: KLIK500 (TB-500 10mg/2mL) and KLIK157 (BPC-157 10mg/2mL). When people search for BPC-157 TB-500 bundle purity, they often hope for one reassuring figure. This article shows how to read purity information for each pen, who should decide what counts as acceptable, and how to fill the form so that it still makes sense when someone reopens it months later. It contains no figures for any batch, because those belong to the reports themselves.

Two pens, two materials to ask about

Because the bundle is two pens, treat it as two lines on your record. One line is for the TB-500 10mg pen and the other for the BPC-157 10mg pen. Each has its own label, its own batch number and, where a report is available, its own paperwork.

A report for one pen says nothing about the other, however closely the two are sold together. If you only have a document for one material, record the other as not yet seen. Do not let one pen's paperwork quietly stand in for the pair.

What a purity statement does and does not say

Purity information is narrower than it sounds. Where a Certificate of Analysis gives a purity figure, that figure describes the sample that was tested, by the method the report names. Three things it does not do on its own:

  • It does not tell you how much material is in the pen.
  • It does not prove the report belongs to the batch on your label. Only the batch number can do that.
  • It does not cover any other material that happens to be sold in the same bundle.

Keep these questions apart on the form. "Purity", "amount stated on the listing" and "report matches batch" are three separate fields, and one tidy number should not be allowed to answer all of them.

Who decides what counts as acceptable?

Some forms ask for a pass or fail entry. Purchasing staff can record what a report states, but the acceptable range for a purity figure depends on the research the material is meant for. That judgement belongs to the researcher or project lead who knows the requirement.

If nobody has set a criterion, say so in the record: "criterion to be set by project lead". An invented threshold added only to complete a field is worse than an honest gap, because it looks like a decision that nobody actually made.

Filling the form honestly

Use one entry per material and record the following for each:

  1. Material and pen name (TB-500, KLIK500; BPC-157, KLIK157).
  2. Batch number as printed on the label you hold or expect to receive.
  3. Report status: listed, not listed, or requested.
  4. The purity figure exactly as the report states it, with the method and units as shown.
  5. The date of the report and the batch it names.
  6. Who set the acceptance criterion, and when.

Where a report is not available on the CoA page or the product page, write "no report listed" rather than leaving the field blank or entering a hopeful placeholder.

When the report is missing or doesn't fit

A missing report and an unfavourable result are not the same thing, and your record should not blur them. "Not provided" means the question is open. It does not mean the material failed anything.

If you need more, send a short, specific enquiry: name the pen, quote the batch number and ask whether a report exists for that batch. If a document arrives but names a different batch or material, record that mismatch and ask for the correct one. Chasing the same document three times rarely helps; if the report cannot answer your question, take the question back to your project lead.

Frequently asked questions

Does one report cover both pens in the STRENGTH bundle?

Do not assume so. Check what each report names as its subject and match the batch number to the label on the pen it belongs to. Reports are published where available, so some items may not have one.

Can purchasing set the purity threshold?

It is better if they do not. The threshold should come from the person responsible for the research requirement. Purchasing can record the criterion and who supplied it.

What if the form only has room for one purity entry?

Add a short note beside the entry explaining that the bundle contains two materials and that each is recorded separately. If the form cannot be changed, attach a two-line table instead of picking one figure to represent both.

From the shop

Browse all products